Surgical Diathermy

Product Details:

The Valleylab Force 40 is a digital electrosurgical unit that displays power and is very flexible in terms of cautery and procedure capabilities. The Force 40 ESU will perform standard functions including blend for both cut and bipolar modes.

Specifications:

• Automatic deactivation impedance: <20ohms, >2000ohms
• Time delay range: .1 to 5.1 seconds
• Activation tone: 45 to 65 dBA
• Alarm Tone: >65 dBA

Output Waveform:

• Cut: 500kHz sinusiod
• Blend 1: 500kHz bursts of sinusiod @50% duty cycle, recurring @ 31.25 kHz
• Blend 2: 500kHz bursts of sinusiod @37.5% duty cycle, recurring @ 31.25 kHz
• Desiccate: 500kHz damped sinusiodal burst with a repetition frequency of 250 kHz
• Fulgurate: 500kHz damped sinusiodal burst with a repetition frequency of 62.5 kHz
• Spray: 500kHz damped sinusiodal burst with a repetition frequency of 31.25 kHz
• Standard Bipolar: 500kHz sinusiod
• Precise Bipolar: 500kHz sinusiod

Output Characteristics:

• Cut: Max P-P 3300, Rate Load 300, Max Power 300, Crest Factor 2.1 @ 100W
• Blend 1: Max P-P 3800, Rate Load 300, Max Power 250, Crest Factor 2.1 @ 100W
• Blend 2: Max P-P 4000, Rate Load 300, Max Power 200, Crest Factor 2.1 @ 100W
• Desiccate: Max P-P 3500, Rate Load 300, Max Power 200, Crest Factor 2.1 @ 100W
• Fulgurate: Max P-P 6500, Rate Load 300, Max Power 150, Crest Factor 2.1 @ 100W
• Spray: Max P-P 9000, Rate Load 300, Max Power 150, Crest Factor 2.1 @ 100W
• Standard Bipolar: Max P-P 550, Rate Load 100, Max Power 50, Crest Factor 2.1 @ 100W
• Precise Bipolar: Max P-P 550, Rate Load 100, Max Power 50, Crest Factor 2.1 @ 100W

Product Details:

Product Details:

Product Details:

The equipments of the series EXCELL MCDSe are electrosurgical units for major surgery, suitable for all operations where the monopolar and the bipolar techniques are used, as well as the monopolar mode with the Argon gas flow. The units are available in 5 different models.

The models EXCELL 400 MCDSe, EXCELL 350 MCDSe, EXCELL 250 MCDSe, and EXCELL 200 MCDSe are indicated for electrosurgery. By the contrary, the model EXCELL 400/A MCDSe is suitable both for electrosurgery and electrosurgery with Argon gas. It is equipped with all the necessary functions for this type of application, and so it is easier to use.

Product Details:

The equipments of the series Excell MCDSe System are electrosurgical units for major surgery, suitable for all operations where the monopolar and the bipolar techniques are used, as well as the monopolar mode with the Argon gas flow. The units are available in 5 different models.
The models 400 MCDSe, 350 MCDSe, 250 MCDSe, and 200 MCDSe are indicated for electrosurgery, but they can be also connected to an external module for the Argon gas. By the contrary, the model 400/A MCDSe is suitable both for electrosurgery and electrosurgery with Argon gas. It is equipped with all the necessary functions for this type of application, and so it is easier to use. 

Product Details:

In the use of surgical diathermy, the technical ability of the unit combined with plain safety are of prime importance – both for the patient and the user. There must be no possibility of accidental, undesirable results in the use of such a unit. With these points in mind and with the introduction of a new high frequency generator technology the new era of KLS Martin electrosurgical units have been developed. The KLS Martin ME 400 and ME 200 are newly developed electrosurgical units of particular safety and reliabillty. The ME 200 may be seen as a standard unit for use in general surgery and the ME 400 as the most refined unit of its kind in the world.

Product Details: